ELMICH PAVING & DECKING SUPPORT
What is SpiraPave®
SpiraPave® is a new generation, high strength pedestal consisting of separate paired components to create pedestals of different heights. Units may be adjusted either up or down in 1mm increments.
SpiraPave® is used to support bearers in the construction of roof terraces, pedestrian walkways, roof gardens, plaza decks, sun decks, pool surrounds and balconies.
SpiraPave® is adjustable in height from 20 to 87mm, making it ideal for installations where conventional supports are impractical.
SpiraPave® may be used in conjunction with a Slope Corrector which compensates for slopes of up to 5%.
SpiraPave® may be used with a Bearer Holder that caters for 50 to 85mm wide bearers.
SpiraPave® is lightweight, has a flat smooth base, and is easy to install. Unlike brick and metal piers, it does not damage water proofing membranes.
SpiraPave® pedestals, for raised flooring on:
- Roof terraces
- Pedestrians walkways
- Roof gardens
- Plaza decks
- Balconies
- Pool surrounds
- Reflective pools
- High load bearing (25kN) strength
- Manufactured from recycled plastics
- 1mm incremental height adjustment commencing at 20mm
- < 5% slope correction unique bearer support holder that caters for varying width bearers
- Supports bearers as well as timber panel decking
- Height and slope adjustable
- Ease of installation
- Catering for bearer widths from 50 to 85mm
- Waterproofing membranes not damaged
- A cost effective alternative to brick and metal piers
- Catering for warped timber
- Supports Green Star building ratings
- Measure the total area to determine the number of bearers required. One SpiraPave® pedestal is required for each linear metre of bearer to be supported.
- Position SpiraPave® pedestals with a Slope Corrector and a Bearer Holder at required intervals.
- Adjust the 0-5% slope corrector to compensate for any falls in the slab.
- Position on bearers and adjust the SpiraPave® pedestal either up or down so that the bearer is level.
- Screw the bearer into the eyelet in the wing of the Bearer Holder.
- Anchor bearers to all perimeter walls using metal brackets.
- Finish with Timber or Composite decking boards.
SpiraPave® pedestals support decking and flooring on balconies and other building structures
Specifications
| Material | Recycled polypropylene |
| Colour | Black |
| Height Range | 17 to 87 mm |
| Diameter Dimensions | |
| Pedestal | 150 mm |
| Slope Corrector | 170 mm |
| Base Plate | 175 mm |
| Bearer Size | 50-85 mm |
| Compressive strength 1 | > 25 kN (@ 0% slope) |
| Slope Correction | 0 to 5% @ 1% increments |
| Biological/Chemical Resistance | Unaffected by moulds and algae and good resistance to alkalis and bitumen |
| Service Temperature | Unaffected by moulds and algae and good resistance to alkalis and bitumen |
1 Compressive strength at 5mm displacement and varies with different heights
SpiraPave® incorporates a number of decking support accessories
SpiraPave® supports 50 to 85 mm timber bearers